Skip to main content

Posts

Showing posts from January, 2023

What is IPSec?

IPSec IPSec (Internet Protocol Security) is a framework of open standards for securing communication over IP networks, such as the Internet. It provides a set of protocols and algorithms that can be used to secure communications at the IP layer, by authenticating and encrypting each IP packet. The main protocols used in IPSec are the Internet Key Exchange (IKE) protocol, the Authentication Header (AH) protocol and the Encapsulating Security Payload (ESP) protocol. IKE is used to establish and manage security associations (SAs) between devices, while AH and ESP are used to provide security services to IP packets. AH provides integrity, authenticity, and anti-replay protection for IP packets, but it does not provide confidentiality. ESP provides confidentiality, integrity and authenticity for IP packets. IPSec can be used to secure a wide range of communication scenarios, including remote access, virtual private networks (VPNs), and network-to-network connections. It is commonly used to ...

Multicast Routing

Multicast Routing There are 3 main modes depending on your application.  1. PIM Dense Mode 2. PIM Sparse Mode 3. PIM Bidir In  PIM Dense Mode , every multicast router floods the multicast traffic to every router in the path, only pruning out the source interface from where it received the traffic so to avoid a loop. It follows a flood and prune mechanism. In  PIM Sparse Mode , it follows a join and prune mechanism, where multicast traffic is only honored from a particular source. How does this work if the receiver doesn't know the source of the multicast traffic? Here we use a third router called the RP (Rendezvous Point), which is a router somewhere in the path between source and destination. When the last hop router (where receiver is connected) receives an IGMP join message, it sends a PIM Join towards RP. This creates shared tree from the last hop router till RP along the routers.Thus a shared tree has been created from last hop router till RP. When a multicast source...